Gauge 32 roofing sheets for houses and suitable buildings
The offer can support house roofs, stores, workshops, kiosks and other approved applications where the project designer or experienced roofing contractor accepts Gauge 32 for the intended span, pitch and exposure conditions.
Quick answer
Gauge 32 sheets are offered at TZS 15,000 per sheet. Before ordering for a permanent roof, confirm profile, coating, sheet length, timber or steel support spacing and suitability with your contractor or engineer.
Offer price
From TZS 15,000
per Gauge 32 sheet
A roof estimate needs more than floor area
Roof sheet quantities depend on slope length, roof pitch, eaves, ridges, valleys, hips, end laps and side overlaps. Accessories such as ridge caps, flashings, gutters, screws and washers should be scheduled separately. Coastal exposure may also justify a different coating or specification. Share roof drawings or measured slopes instead of using building floor area alone.
Ready to confirm your order?
Send the use case, quantity, length, colour and Zanzibar delivery location. The written quotation will confirm the order.
Important questions
Is Gauge 32 suitable for every permanent roof?
No single gauge suits every roof. Span, purlin spacing, pitch, wind exposure, coastal conditions and building use should be checked by the responsible contractor or engineer.
Can Zanzibaba estimate sheets from my roof drawing?
Yes. Send clear drawings or measured roof slopes, plus the preferred profile and lengths. The estimate remains subject to site and installer verification.
Are ridge caps and screws included in TZS 15,000?
No. The displayed offer is for one Gauge 32 sheet. Ridges, flashings, gutters, screws, washers and delivery are separate unless included in a written quotation.